MATERIAL SAFETY DATA SHEET

SECTION I - Identity – AQUA-5 EPOXY CONCRETE PATCH (MIX B)

ES INDUSTRIAL CORP.  P.O. BOX 843 RED BANK, NJ 07701

Date Prepared  05-11-2000   For Emergency   800-877-2436   For Information  800-877-2436

SECTION II – HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

Hazardous Component(s)              CAS #                      OSHA  PEL             ACGIH  TLV                  Other Limits              %(opt)  

ISOPHORONE DIAMINE             2855-13-2                  NO                                    PPM-ND                                                             44.0

BENZYL ALCOHOL                     100516                       NO                                   PPM-ND                                                             45.0

REACTION PRODUCTS OF:

EPICHLOROHYDRIN AND BIOPHENAL A 25085-99-8 NO                                 PPM-ND                                                              6.0

ALKYL GLYCIDYL ETHER          68609-97-2               NO                                   PPM-ND                                                              1.0

SECTION III – PHYSICAL & CHEMICAL CHARACTERISTICS

Boiling Point:   400 F             Specific Gravity (H2O = 1): N/A    Vapor Pressure (mm Hg):   0.02 MM/HG, 0.1 MM/HG, N/A, N/A

Melting Point: N/A                Vapor Density (Air =1): HEAVIER THAN AIR          Evaporation Rate(Water = 1): SLOWER THAN ETHER

Solubility % Water: N/A       Appearance & Odor: 

SECTION IV – FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used): NONE    Flammable Limits in Air/Volume: Lower : NONE    Upper: NONE

Extinguisher Media:  REGULAR FOAM, CARBON DIOXIDE OR DRY CHEMICAL     Special Fire Fighting Procedures:   SELF-CONTAINED BREATHING APPARATUS WITH A FULL FACE PIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE MODE  

Unusual Fire/Explosion Hazards:  VAPORS ARE HEAVIER THAN AIR AND MAY TRAVEL ALONG SPARKS, HEATERS, SMOKING, ELECTRIC MOTORS, OR OTHER IGNITION SOURCES AT LOCATIONS DISTANT FROM MATERIAL HANDLING POINT.  NEVER USE WELDING OR CUTTING TORCH ON OR NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST RESIDUE) CAN IGNITE EXPLOSIVELY.

SECTION V – REACTIVITY DATA

Stability-Cond to Avoid: STABLE     Hazardous Polymerization-Cond. To Avoid: WILL NOT OCCUR

Hazardous Decomposition Products:  MAY FORM TOXIC MATERIALS- CARBON DIOXIDE AND CARBON MONOXIDE, NITROGEN OXIDES, ETC.

Incompatibility (Materials to Avoid): AVOID CONTACT WITH STRONG OXIDIZING AGENTS (E.G., NITRIC ACID, PERMANGANATES, ETC.)

SECTION VI – HEALTH HAZARDS DATA

Routes of Entry: Inhalation :  X  Skin:  X   Ingestion:  X    Health Hazards(Acute & Chronic)NONE KNOWN

Signs & Symptoms of Overexposure:  EYES:  CAN CAUSE SEVERE IRRITATION, REDNESS, TEARING, BLURRED VISION, BURNS   SKIN:  CAN CAUSE SEVERE IRRITATION DEFATTING, DERMATITIS, BURNS   INHALATION:  CAN CAUSE NAUSEA AND HEADACHE, POSSIBLE UNCONSCIOUSNESS.  IN SEVERE CASES RESPIRATORY STIMULATION IS FOLLOWED BY RESPIRATORY AND MUSCULAR PARALYSIS, CONVULSIONS AND NARCOSIS   INGESTION:  CAN CAUSE GASTROINTESTINAL IRRITATION, NAUSEA, VOMITTING, AND DIARRHEA

Chemical Listed as Carcinogen: NONE    NTP: NO     IARC Monographs: NO

Condition Generally Aggravated by Exposure: NONE KNOWN

Emergency and First Aid Procedures

Inhalation   REMOVE INDIVIDUAL TO FRESH AIR.  IF BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION.  KEEP PERSON WARM, QUIET, AND SEEK MEDICAL ATTENTION

Eyes       FLUSH WITH LARGE AMOUNTS OF FRESH WATER, LIFTING UPPER AND LOWER LIDS OCCASIONALLY.  GET MEDICAL ATTENTION 

Skin        THOROOUGHLY WASH EXPOSED AREA WITH SOAP AND WATER.  REMOVE CONTAMINATED CLOTHING.  LAUNDER CONTAMINATED CLOTHING BEFORE RE-USE.

Ingestion  DO NOT INDUCE VOMITTING.  KEEP PERSON WARM, QUIET, AND SEEK MEDICAL ATTENTION

SECTION VII – PRECAUTIONS FOR SAFE HANDLING AND USE

Handling & Storage Precautions:  .

Other Precautions:  CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTIED.  SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THIS DATA SHEET MUST BE OBSERVED.  KEEP OUT OF REACH OF CHILDREN

If Material is Released/Spilled:  SMALL SPILL:  ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR OTHER ABSORBENT MATERIAL AND TRANSFER TO VENTILATED CLOSURE   LARGE SPILL:  STOP SPILL AT SOURCE, DIKE AREA OF SPILL TO PREVENT SPREADING, PUMP LIQUID TO SALVAGE TANK.  REMAINING LIQUID MAY BE TAKEN UP ON SAND, CLAY, EARTH, FLOOR ABSORBENT, OR OTHER ABSORBENT MATERIAL AND SHOVELED INTO CONTAINERS

Waste Disposal:  DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS 

SECTION VIII– CONTROL MEASURES

Respiratory Protection:  IF TLV OF THE PRODUCT IS EXCEEDED, A NIOSH/MESA JOINTLY APPROVED SELF-CONTAINED BREATHING APARATUS WITH A FULL FACE PIECE OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE NIOSH/MESA RESPIRATORS UNDER SPECIFIED CONDITIONS    Ventilation Local/Mechanical:  PROVIDE SUFFICIENT MECHANICAL (GENERAL) AND/OR LOCAL EXHAUST VENTILATION TO MAINTAIN EXPOSURE BELOW TLV’S

Special: NONE     Other:         Protective Gloves:   WEAR RESISTANT GLOVES SUCH AS BUNA-N    Eye Protection:  CHEMICAL SPLASH GOGGLES IN COMPLIANCE WITH OSHA REGULATIONS

Protective Clothing Equipment:   WEAR IMPERVIOUS CLOTHING AND BOOTS        Work/Hygienic Practices: WASH HANDS AFTER USING